BOOST YOUR CT INSPECTION

An universal upgrade kit for industrial CT scanners
Up to 60% efficiency increase without hardware and software changes to existing system.

OUR PRODUCTS

POLYCT large

POLYCT – L3

object diameter 75 mm
field of view: 225 mm
Laser alignment

POLYCTM3

object diameter 50 mm
field of view: 150 mm
Laser alignement

POLYCT – Bundle

M3 + L3
2 reconstruction licenses

POLYCT large

POLYCT – L3

object diameter 75 mm
field of view: 225 mm
Laser alignement

POLYCTM3

object diameter 50 mm
field of view: 150 mm
Laser alignement

POLYCT – Bundle

M3 + L3
2 reconstruction clients
Laser alignement

POLYCTCUSTOM

object diameter 50 – 100 mm
field of view: 350 mm
Laser alignement

Reco Software Fraunhofer

POLYREKO

Compatible with common CT data
Geometry Compensation
Fast individual reconstruction

POLYCTCUSTOM

object diameter 50 – 100 mm
field of view: 350 mm
Laser alignement

Reco Software Fraunhofer

POLYREKO

Compatible with common CT data
Geometry Compensation
Fast individual reconstruction

LONG STORY SHORT

Simplicity does not need many words of explanation

Scan three samples in the time of one, with no superposition of each other resulting in:

+ shorter scantime
+ threefold thoughput
+ highest individual image quality
+ lower X-ray power needed
+ lower wear of your CT system and
+ less maintenance

THE INSTALLATION TAKES EVEN SHORTER

Completely non-invasive installation, ensuring full functionality of the CT system without the need to involve the CT provider

  1. Clamp the POLYCT onto the CT-chuck
  2. lock the correct rotation position
  3. Place your samples and 
  4. Adjust the optimum magnification
  5. Run your CT scan as usual
The postprocessing of the data is handled on the local reconstruction client using the POLYREKO software

 

VERSATALITY

Choose between the different size options. The M3 version is optimised for use on micro-CT and the L3 version for macro-CT applications on larger objects

Select between the L3 and M3 version based on the diameter (d3) of the objects to be measured.

In addition, you can use only the two outer turntables to scan objects with a larger diameter (d2) at half the measuring time. 

 

POLYCT – M3

POLYCT – L3

d3

50 mm

75 mm

d2

75 mm

110 mm

once installed, the central axis can be used as usual, without being affected by the installation.

PROVEN COMPATIBILITY

Our clients run the POLYCT allready on CT systems of the following providers 

Nach oben scrollen

POLYREKO

Compatibility
Geomatry Compensation
Fast individual reconstrution